125 MAIN STREET, SOUTH LOWER LEVER, GEORGETOWN, ON, L7G3E5

​​​​​​​

   905.873.1777

   HOURS: 8:30 AM - 5 PM MON-FRI

OUR PRODUCTS

Crane Products


21T10A

- Up to 9 functions

- 4 discrete rockers

- On/Alarm and Off/Stop buttons

- 300 ft. line of sight range

- Uses 2 standard AA batteries

- IP66/67 design(waterproof/dustproof)

21T14A

- Up to 13 functions

- 6 discrete rockers

- On/Alarm and Off/Stop buttons

- 300 ft. line of sight range

- Uses 2 standard AA batteries

- IP66/67 design(waterproof/dustproof)

 

21T18A

- Up to 18 functions

- 3 two-step discrete rockers

- 4 push buttons

- On/Alarm and Off/Stop buttons

- Optional selector switch

- 300 ft. line of sight range

- Uses 2 standard AA batteries

- IP66/67 design(waterproof/dustproof)

21T20

- Up to 20 functions

- 3 large discrete rockers

- 6 push buttons

- On/Alarm and Off/Stop buttons.

- Optional key switch or rotary switch can be fitted on controller for your application.

- Uses 3 standard AA batteries

-300 ft. line of sight range.


21T23

- Up to 21 functions with 9 large discrete rockers

- 3 push buttons,

- On/Alarm and Off/Stop buttons.

- Optional key switch or rotary switch can be fitted on controller for your application.

- Uses 3 standard AA batteries

- 300 ft. line of sight range.

Excalibur

The compact Excalibur is the entry model into the Laird Technologies ct24-class. Hard to believe that this device weighing only 300 grams can move loads weighing tons on cranes and grabbers almost as if they were toys.

MKU Systems

- Rugged design for use in harsh environments
- Rubberized end caps to absorb heavy shocks
- System configuration via removable contact-less RFID
key (TransKey™)
- System status and low-battery LED indicator with audible
beep

Toggle Controller

- Use with most Cattron® brand AT or MP Series System
- FCC Narrowband complient models available
- Customized layout with custom-engraved nameplates
- Rugged design for use in harsh environments

​​​​​​​

LRC-M1

- Control up to four motions with two multi-axis joy stick controllers
- Lightweight impact resistant Lexan EXL® housing for rough environments
- Flexible operations with TransKey™ configuration
- Conforms to EN954-1, Category 3 and EN 13849-1 Performance Level d
- IP65 protection class, rated for outdoor use.

Joystick Controller

- For use with any Cattron-Theimeg AT or MP Series
Portable Radio Remote Control System
- Joysticks available as stepped or stepless (proportional)
- Also available with notched joysticks
- Customized layout with custom-engraved faceplates
- Suitable for indoor and outdoor applications

LCAS

- Retroreflective Class 1 Laser
- Range: 0.3 m to 50 m (1 foot to 164 feet)
- Field selectable Alarm output and
Stop settings
- Internal by-pass switch to over-ride Stop
function

- LED status lights
- Suitable for dry indoor use only

MK (Metal Keypad)

- For use with most Cattron - Radio Remote Control Systems
- Color-coded “i-Key” adds security and eliminates need for specific spare controllers
- Extremely durable housing made of extruded aluminum
ergonomically designed with curved housing and rubber grips for comfortable handling
- Separate watertight power ON/OFF switch and twist-on/twist-off


Paddle Controller

- Use with any Cattron® brand AT or MP Series System
- Customized layout with custom-engraved nameplates
- Rugged design for use in harsh environments
- Push to Operate (PTO) safety bar
- Two stage LED battery indicator with audible beep
- Power-on self-diagnostics

Remtron - T46Z

-Up to 24 Functions 
- On/Alarm and Off/Stop Buttons
- Up to 6 Step-less Single Axis Levers or 4 Two-Axis Joysticks
- Up to 10 Toggle Switches
- Optional Multiplex Selector or Key Switch

LRC-L1

- For control of motors with digital and/or analog drive systems
- Displays important feedback information
onto a graphic LCD and/or LED
- High safety-class through redundant hardware and software architecture
- Approvals and frequencies for worldwide deployment


Railroad Products

​​​​​​​

Accuspeed

- The ability to add multiple radio repeaters that extend the operating range of the LRC systems.
- Pathfinder™ automatic selection between the repeater and the direct transmission path that is totally transparent to the operator.
• Robust 2-way data radio communication for the time critical operation to and from multiple locomotives
operating in the rail yard.

AT - Ballast Car Unloader

- Operators can control multiple ballast release doors, plows and other auxiliary functions
- Operators can select different hopper carsfrom the controller
- Fast command response for quick shut off
- Two operators can control ballast doors or other auxiliary functions independently orsimultaneously

Beltpack

- RC 24/7 Helpdesk Program

Training Services (Operations & Maintenance)

- Supply of Parts and Components/Repair Services

- Application Engineering and Customization

- Installation and Commissioning Services

- LRC Mode Yard Efficiency Review

Locomotive Remote Control

For new systems, please contact the factory at 724-962-3571.

Locomotive Remote Control

For new systems, please contact the factory at 724-962-3571.

​​​​​​​

Digital Event Recorder

- Electronic hardware and software, including pneumatic analog and digital sensors.
• Main Recorder Cable connecting Event Recorder to the locomotive.
• RS-232 MP96G2 Receiver/Decoder Cable connects the event recorder to the RC Locomotive Control Unit (LCU).
• All LCU software
• Serial Download Interface Port (locomotive cab mounted enclosure) incorporating a DB9 connector that enables data downloads
to a laptop computer.

MP 96 RCL

- Multiple systems can operate on one frequency

- Up to 48 inputs and 96 outputs allow for complete customization

- Long " ride through" time during power supply interruptions

- Responds rapidly to operator commands

- Extensive data logging, hardcopy printout with time and date stamp

- Extensive EMI/RFI protection

TH-AMR terminal

- Increased availability of the terminal

- Increased safety of receiver signal

- Increased range

TH-EC/LO-SFS

- Use with most Cattron® brand AT or MP Series System
- FCC Narrowband complient models available
- Customized layout with custom-engraved nameplates
- Rugged design for use in harsh environments


TH-EC/LO-VFS

- 1 key switch

- 1 mushroom-head switch for stop-function

- 1 dual axis joystick 2 x 1-0-- - 1 for throttle-/ brake commands

- 9 additional momentary or maintained switches

- 1 tilt switch

- 1 buzzer - warning signal

time division multiple access frequency management system for up to 5 systems simultaneously on one channel in the same area

TH-LRC/LO

- 1 dual axis joystick 2 x 1-0-- - 1 for throttle-/ brake commands

- 9 additional momentary or maintained switches

- 1 mushroom-head switch for stop-function

- 1 key switch

- 1 buzzer for acoustic warning signals

TH-EC/LO-TFS

- 1 key switch

- 1 mushroom-head switch for stop-function

- 2 pushbuttons for power control

- 9 additional momentary or maintained switches

- 1 buzzer - warning signal

- 3 status LEDs

- time division multiple access frequency management system for up to 5 systems simultaneously on one channel in the same area

​​​​​​​